Example of fittings and accessories in a Changing Places facility

Changing Places Typical Toilet

Key/specification

1. WC (CP COM).
Provide and install PalmaVita ShowerToilet.Allow for connection to 100mm waste and 15mm mains water supply. Power supply to be unswitched 10amp spur. Installation as per manufacturers instructions, unit to be commissioned by supplier. Supplier:Total Hygiene Ltd.
2. Ceiling hoist and track (CP XY 1).
Provide and install 3m x 4m powered X-Y system with manual traverse and powered lift/lowering. Provide 13amp switched fused spur for hoist at ceiling height. Fixing method to be determined by supplier/manufacturer. Supplier:Total Hygiene Ltd.
3. Height adjustable adult-sized changing bench (CP CB 3-7).
Provide and install 1800mm x 700mm height adjustable changing table c/w safety rail. Allow for connection to flush-mounted 10amp spur as per manufacturers instructions. Supplier:Total Hygiene Ltd.
4. Wash basin (CP WBB 1-6).
Provide and install height adjustable wash basin. Allow for connection to 15mm hot & cold water supplies, 32mm waste and flush-mounted 240v spur as per manufacturers instructions. Supplier:Total Hygiene Ltd.
5. Drop down rail (CP DDR 1).
6. Vertical grab rail (CP GR 1).
7. Retractable privacy curtain/screen (CP WS 1).
8. Wide paper roll dispenser for use on the changing table (CP PD 1).
9. Full length mirror (CP M 1).
10. Paper towel dispenser.
11. Alarm pull cord.
12. Waste disposal bin.
13. Large sanitary disposal bin.
14. Manually operated hand-dryer.
15. Two clothes hooks, at 1051mm and 1400mm above the floor.
16. Sanitary towel dispenser.
17. Alarm reset button.
18. Horizontal grab rail.
19. Floor drain.
20. Shower.


» Back